Making waves

Hello my friends! First of all, thanks for all the suggestions on my last post! I’m checking out all the links for the rugs. You guys rock! I’m back with a quick little project I finally finished up for my son’s bathroom. I shared my plans for this room a few weeks ago and your comments were so helpful as always! I’m looking into a window for the room right now. I have to special order the size I want but I found someone to put it in. SO excited.

The rest of the big plans will come later, but for now I want to at least do a few little things to start updating the space. My boy is a baby no more and he needs a slightly more mature space. The little leap frogs must go.

CRY. WAIL.

I found a ship’s wheel at HomeGoods years ago – knowing the direction I wanted to go in this room even back then. It’s been sitting under his sink for all those years. I actually forgot about it till I cleaned out the cabinet late last year. Awesome.

I held it up on the wall and it felt a little sparse all by itself, so I decided to add a little somethin’ behind it. It started with some scrap wood in the garage – don’t they all? I don’t throw wood away and this is why.

I cut it down to 24 by 24 inches using my jigsaw. I’m horrible at cutting straight lines but I’m getting a bit better. To get a good line to follow, I measure my distance every few inches along the wood, then use something long and straight (like scrap wood) to make my line:

cutting straight line with jigsaw cutting straight line with jigsaw

If I take my time I can get a fairly straight line with the jigsaw:

using a jigsaw

Not perfect like a table saw would cut, but decent. This is why they invent wonderful things like caulk. :)

This is more of a particle board than a nice finished wood but it’s all I had in the right size, so to smooth it out a bit I sanded it down and then used some spackle to fill in the bigger divots:

spackle

I didn’t fill everything because I didn’t mind it having a slight texture. After another sanding it was ready for primer and paint. I did one coat of primer and two coats of the almost white color I used in the mud room. It has a ever-so-slight grey undertone to it but if you just look at it, it looks white. I’m planning on using this color in the bathroom since I have some leftover.

I wanted to add some fun so I picked one of the FrogTape® Shape Tape™ options to use. I haven’t used the wave design yet and I thought the bathroom would be the perfect place! I started by putting the first length of the tape right in the middle of the board. Then I measured about two inches down for each one, but I wasn’t crazy particular about it:

wave painter's tape

The goal was to make them the same distance from both the top and the bottom.

I made sure to press the tape down really well – I was a little nervous about this wood and it’s rough texture and potential seepage. After it was sealed well I gave it a few coats of a blue color I’m hoping to use on the vanity in the bathroom. Usually I like to pull up my tape when the paint is wet, but when you have to do multiple coats you just have to wait it out. It’s SO hard to wait to see how the lines look! :)

Thankfully they were PERFECT!:

wave painter's tape

I added some lattice wood around the edges as a “frame” of sorts and then laid the whole thing on the floor to see where I wanted the wheel to sit on the board:

DIY nautical art

And I LOVED it! So preppy, so fresh! Love that blue too, it’s a definite for the vanity.

Here it’s hung with a nail but I later went back and put a little cleat on the back of the wheel instead. That nail was bugging me. Details. :)

I went ahead and painted the one wall (the wall I may knock down much later) and was surprised at how much better it looked without all that yellow. The yellow tone wasn’t doing any favors without any natural light in there.

I hung the wheel on that wall and it was a perfect fit!:

DIY nautical art

I just think it’s adorable, really. The waves totally make it.

Have you done any fun projects like this lately? This one will set the tone for the whole room – now I can’t wait to get started!

Have a GREAT weekend folks!

 

P.S. The annual Earn Your Stripes™ painting contest is going on now! If you are interested in entering a project, check out all the details here. The projects last year were AMAZING. And all entries will receive a roll of Shape Tape! :) Fun stuff.

I received compensation to complete this project for using FrogTape® products but use them anyway. :) All opinions, projects and ideas are based on my own experience.

No comments:

Post a Comment